Nortel ALTEON OS BMD00009 Quick Manual

Also see for Alteon OS: Command reference Application guide Command reference guide

Contents

Alteon OS BBI Quick GuideGetting Started 11BMD00009, November 2007Enabling/Disabling BBI AccessBy default, BBI access is enabled. If you need to disable or re-enable access, use the followingcommand from the GbE Switch Module command-line interface:For more information on the accessing and configuring the switch through the command-lineinterface, see your Alteon OS Command Reference.Web Browser Set UpMost modern Web browsers work with frames and JavaScript by default, and require no addi-tional set up. However, you should check your Web browser’s features and configuration tomake sure frames and JavaScript are enabled.NOTE – JavaScript is not the same as Java. Please make sure that JavaScript is enabled in yourWeb browser.Starting the BBIWhen the switch and browser set up is done, follow these steps to launch the BBI:1. Start your Web browser.2. Enter the switch IP interface address in the Web browser’s URL field.For example, consider an IP interface with a network IP address of 1.90.90.96You could enter the following:>> Main# /cfg/sys/access/http <disable|enable (or just d|e)>