46 BES50 advanced features configurationEnabling SNMP serviceUse the SNMP Agent page to enable SNMP service for all managementclients (versions 1, 2c, 3).Procedure stepsStep Action1 From the main menu, choose Configuration > SNMP > AgentStatus.2 Select the Enable check box.3 Click Submit.—End—Variable definitionsVariable ValueSNMP Agent Status Select to enable SNMP on the switch.Configuring SNMP version 3 management accessUse these procedures to configure SNMP version 3 management access tothe BES50.Navigation• "Setting the local engine ID" (page 46)• "Setting a remote engine ID" (page 47)• "Setting SNMP version 3 views" (page 48)• "Configuring SNMP version 3 users" (page 49)• "Changing the assigned group for an SNMP version 3 user" (page 50)• "Configuring remote SNMP version 3 users" (page 51)• "Creating SNMP version 3 groups" (page 52)Setting the local engine IDUse this procedure to set the SNMP version 3 engine ID on the BES50 if itis different from the default value or if it has been deleted.ATTENTIONIf this local default engine ID is deleted or changed, all SNMP users are clearedand all existing users must be reconfigured.SMBUsing the Nortel Business Ethernet Switch 50 SeriesNN47924-301 01.01 Standard1.00 October 2006Copyright © 2006, Nortel Networks Nortel Networks Confidential.
