Nortel Contivity 100 Setting Up

Contents

Chapter 5 LEDs: support and diagnostic functions 59Setting Up the Contivity 100 UnitLEDs 1 through 8 and the Power LED during operationAfter the power-up sequence is complete, the LEDs indicate status and activityduring operation as shown in Table 11.Table 11 LED status and appearance during operationLED # Color Appearance MeaningPower Green Solid Unit has electrical power and is turned on.Power Green andAmberSolid Green andFlashing AmberUnit is updating flash memory. DO NOT TURNTHE UNIT OFF until the Power LED returns togreen.1-8 Amber Solid Power voltage selector switch is set to 230 butthe power cord is plugged into a 110 voltageplug.1 Green Blinking Unit is operating normally.2 Green Solid Unit is ready to service clients.2 Green andAmberSolid Green andFlashing AmberUnit is communicating with clients.2 Amber Solid Unit is ready to be configured, but cannotservice clients (normally occurs before unit hasbeen configured).3-8 Green Solid Indicated interface (see Note below) is online.3-8 Green Flashing Indicated interface (see Note below) is dialing orattempting connection.3-8 Green andAmberSolid Green andFlashing AmberTraffic is on the indicated interface.3-8 Red Solid Indicated interface (see Note below) has failed.Note: The “indicated interface” is the interface associated with theLED’s number. This information is available in the main dialog box of theSetup program. For more information, refer to Using the Contivity BranchAccess Management Software Version 7.20.