Nortel Digital Telephone IP Adapter Installation And Administration Manual

Also see for Digital Telephone IP Adapter: Release note Quick start guide

Contents

48 Digital Telephone IP Adapter Installation and Administration GuideInstalling the Digital Telephone IP Adapter unit Standard 3.03 Use both hands to push forward until the circuit card snaps into place underthe brackets.Note: Two holes on either side of the circuit card are now aligned with thecorresponding holes on the footstand.4 Attach the Digital Telephone Internal IP Adapter circuit card to the footstandwith the screws supplied in the Installation Kit.Note: Refer to “D” in the diagram on page 48.5 Plug the male RJ-11 connector on the loose end of the Meridian Line Cordattached to the Digital Telephone Internal IP Adapter circuit card into thejack on the telephone.6 Re-attach the footstand to the bottom of the telephone.7 Apply the overlay identifying the power connection and the jack connectingyour Ethernet for IP network connectivity.G101493Ccircuit cardD