70 Operating the Ethernet Routing Switch 8000 SeriesRemoving a flash memory card: 8010, 8006, 8003 chassis2 Pull the flash memory card out of the card receptacle.—End—Protecting memory card filesNortel ships each memory card with its read-write protect switch in theunprotected position. After you successfully load the configuration file andsave your configuration, you may want to write-protect the memory cardfor backup purposes.Typically, you do not operate an Ethernet Routing Switch 8000 Series with awrite-protected memory card. Make a copy of your configuration on anothermemory card, write-protect that card, and store it in a safe place. If youdo not have a second memory card, you can copy your configuration to aTFTP or FTP server.To change memory card protection:Step Action1 To remove the card, press the eject button above the memory cardreceptacle.See the figure "Removing a flash memory card: 8010co chassis"(page 69).2 Pull the card out of the card receptacle.CAUTIONYou must remove the card from the 8691SF CPUmodule or the 8692SF CPU module before changing theread-write protection. Failure to remove the card canresult in improper write protection.Nortel Ethernet Routing Switch 8600Installing and Maintaining the Ethernet Routing Switch 8000 Series ChassisNN46205-303 01.01 Standard4.1 2 January 2007Copyright © 2007, Nortel Networks Nortel Networks Confidential.
