Nortel Meridian M3901 Quick Reference Card

Also see for Meridian M3901: Description Installation and administration guide Installation guide Reference guide User guide

Contents

feature operation

Nortel Meridian M3901 Quick Reference Card Manual pdf 2 page image

Feature OperationNote 1: Features must be enabled by your networkadministrator. You only have access to the fivefeatures or Auto Dial positions that appear on thefeature card of your telephone .Note 2: When activating features or programming AutoDial Keys, you have 30 seconds to complete thekey sequence or the process ends .For information on using your M3901 telephone when connected to aMeridian SL-100 system, please consult the Meridian Digital TelephonesM3901, M3902, M3903, M3904 User Guide.ExplanationsFor additional information on the operation of your telephone, pleaseconsult the Meridian Digital Telephones M3901, M3902, M3903,M3904 User Guide.Auto Dialstore AB Ause AHoldplace a call on holdreturn to a held callTransfertransfer a call A CAConferencecreate a conference AD Acorrect an error orreceive busy toneLast Number RedialRing Againactivate Awhen notified Acancel ASpeed Callstore AE Ause A FVolume Controlringing (while the telephone is ringing)handset (while on a telephone call)Deactivate all activefeatures £Fx FxFxFx FxFxFxFx FxFxFxFxFxFxLegendLift the handset, or press to receive dialtone.Replace handset, or press to end the call.Dial a number.Press the Line Key.Press the Hold Key.Press the Goodbye Key.Press the Feature Key.Press the left side of the Volume Control Bar to lowerthe volume. Press the right side to increase the volume.Message Waiting and Call Status IndicatorOn (steady light) A message is waiting.Wink (slow flash) An incoming call is ringing.Flash A call is on hold.Off There is no message waiting, no call on hold, andno incoming call.Feature Activation IndicatorOn (steady light) One or more features are active.Flash A feature is being programmed and input isrequired.RemarksA Press the Dial Pad Key (⁄ - fi) that corresponds toAuto Dial or Feature number on your feature cardB Use the Dial Pad to enter the number (maximum of 31characters). Be sure to include any required accesscodes.C Dial the number to which you want to Transfer thecall.D Dial the number of the party that you want to add tothe Conference. You may repeat this process to addup to six people to a Conference Call.E Dial the 1 to 3 digit Speed Call code (ask yournetwork administrator if you are unsure about thenumber of digits used on your network) followed bythe telephone number that the code represents(maximum of 31 digits). Be sure to include anyrequired access codes.F Dial the 1 to 3 digit Speed Call code.Fx

/ 2

Related manuals for Nortel Meridian M3901