28While on an active callIf the transferred call is notanswered, your telephone rings:1. Lift the handset.2. Press the Transfer Key and repeat thetransfer (to a different DN).Note: If you transfer a call to a person andthey pick up the line while you are still onthe line, press the Goodbye Key tocomplete the transfer. Check with yournetwork administrator to determine thetime interval of your recall timer.Use Attendant RecallThe Attendant Recall feature allows you to contact an attendant while on a calland connect the call to the attendant.To contact the attendant while on acall:1. Press the Attendant Recall Keywhile on a call.Stay on the line until the attendantanswers./ 2. Press the Goodbye Key.The caller remains connected to theattendant.Note: On the Meridian SL-100, theAttendant Recall Key is not available; usethe Transfer Key to connect a call to theattendant.Use Call Park (M3902)The Call Park feature allows a call to be held temporarily and to be retrieved fromany telephone. You can park an incoming call and page the called party. Whenyou use Call Park, you do not tie up a line. Your network administrator can set upa System Park Extension where most calls are automatically parked.If configured network-wide, Call Park can be used across networks.TransAttRecallGoodbye
