52Additional Call FeaturesAdditional Call FeaturesAuto Dial Transfer FeatureAuto Dial Transfer allows you to use your Auto Dial Key to transmit digits to thecentral office after a Trunk Switchhook Flash. You must be on a centraloffice/exchange (CO) trunk call from or to a CO which offers Centrex orexchange line-type features.To use Auto Dial Transfer when youpick up an incoming trunk call:1. Press the Centrex Switchhook FlashKey and wait for interrupted dial tone.2. Press the Auto Dial Key to call thenumber desired./ 3. Press the Goodbye Key to end the call.Note: On the Meridian SL-100, Auto Dialcan be used to transfer calls however, youdo not have to be on a central office trunkcall, and the Centrex Switchhook Flash keyis not applicable to the Meridian SL-100.Use the buzz signalBuzz allows one person, whose telephone is linked to another telephone, to signalthe other telephone. The person signaled hears a buzz. Use this feature to notifythe other person of a call, a visitor, or a request.To buzz the telephone linked toyours:Press the Buzz Key.The telephone linked to yours, buzzesas long as you hold down the key.Note: Buzz signal is not available on theMeridian SL-100.CentrexSHFAutoDialGoodbyeBuzz
