28While on an active callUse Call ParkCall Park allows a call to be held temporarily, to be retrieved from any telephone.You can park an incoming call and page the called party. When you use Call Parkyou do not tie up a line. Your system administrator can set up a System Park DNwhere most calls get automatically parked.If configured network wide, Call Park can be used across networks.To Park a call on the System ParkExtension or your own DN:While on an active cal,press the Park Key.If there is a System Park DN, the callautomatically parks on the System ParkDN. Otherwise, it parks on your DN.Note: On the Meridian SL-100, press thePark Key and you receive a confirmationtone. Press the Park again or theGoodbye Key.To park a call on a DN other than theSystem Park Extension or your ownDN:1. Press the Park Key.2. Dial the DN where you want to parkthe call.3. Press the Park Key again.Note: On Meridian SL-100, press DirectedCall Park (DCPK) Key. Dial the DN whereyou want to park the call. Press DCPKagain.To park a call using the SPRE code orFFC/FAC:or 1. Press the Transfer Key or press theConference Key.ParkParkParkTrans Conf
