Operating your MCC 3100 for Windows Mobile deviceNortel Mobile Communication Client 3100 for Windows Mobile User Guide 49Operating your MCC 3100 for WindowsMobile deviceThis section contains the following topics:• “Starting and exiting MCC 3100 for Windows Mobile” on page 49• “Logging on and logging off” on page 50• “Hiding MCC 3100 for Windows Mobile” on page 52• “Overview of the main pane” on page 53• “Navigating panes” on page 54• “Call Alert mode and Phone Volume” on page 58• “Native dialpad” on page 59Starting and exiting MCC 3100 for Windows MobileThis section describes how to start and exit the MCC 3100 application.Starting MCC 3100 for Windows Mobile1. On the mobile device, select Start, Programs, Nortel MCC 3100.The splash pane appears.Note: The first time you start MCC 3100 for Windows Mobile, awarning pane appears. Select Yes to run the application.After the application starts, the Main pane appears.2. Enter your configuration settings if prompted. For more informationabout configuring MCC 3100 for Windows Mobile, see “Initialconfiguration” on page 33.Note: Startup time and ongoing performance of the MCC 3100 isdependent on the system resources that are currently available.Autostarting MCC 3100 for Windows MobileIf you turn off your device while MCC 3100 for Windows Mobile is running,the application will automatically start when you turn the device on.
