154 Chapter 5 Configuring and graphing chassis information314723-D Rev 01Editing chassis informationTo edit the chassis information:1 From the Device Manager menu bar, choose Edit > Chassis.The chassis dialog box opens with the System tab displayed.2 Click on the Chassis tab.The Chassis tab opens (Figure 56 on page 155).DefaultBootConfigFileName The default Boot Configuration File directory name.ConfigFileName Allows you to type the name of a new configurationfile.Action Can be one of the following actions:• hardReset—Resets the device and runs power-on tests.• softReset—Resets the device without runningpower-on tests.• resetCounters—Resets all statistic counters.• cpuSwitchOver—Switch control from one CPU toanother.• resetConsole—Reinitializes the hardware UARTdrivers. Use only if the console or modem connection ishung.• resetModem—Reinitializes the UART drivers on themodem port. Use only if the console or modemconnection is hung.• saveRuntimeConfig—Saves the current run-timeconfiguration.• saveRuntimeConfigToSlave—Saves the currentrun-time configuration to the standby CPU.• saveBootConfig—Saves the current bootconfiguration.• saveBootConfigOnSlave—Saves the current bootconfiguration to the standby CPU.Result Displays a message after you click Apply.Table 38 System tab fields (continued)Field Description
