Nortel Secure 4134 Quick Start Manual

Also see for Secure Router 4134: Installation Installation instructions Quick start Configuration Installation

Contents

Installing the interface modules 33Slot numbering legend printed on the Secure Router 4134Slots 1 to 4 are Small Module slots. Slots 5 to 7 are Medium Module slots.If you insert a Large Module, it spans slots 6 and 7. If you install a LargeModule, slots 6 and 7 become slot 6.For detailed information about the Secure Router 4134 modules, see NortelSecure Router 4134 Installation — Hardware Components (NN47263-301).Average time to install an interface module: 1 minute.CAUTIONESDTo prevent damage from electrostatic discharge, always wearan antistatic wrist strap connected to an ESD jack when youwork with interface modules. The router does not have an ESDjack—connect the antistatic wrist strap to an ESD jack at your site.CAUTIONRisk of equipment damageAlways handle interface modules by the edges, or use the levers,where applicable.Prerequisites• Ensure you have a Phillips #2 screwdriver.Nortel Secure Router 4134Quick StartNN47263-100 01.01 Standard10.0 16 July 2007Copyright © 2007, Nortel Networks.