Page 7 of 105. Two different length U-bolts are supplied with the hardware kit for attaching the hose reel asneeded to a truck or cart.Before Each Use⚠WARNING Be sure all fittings are tightly secured.Be sure the unit is place in a level, secure position.Operating Instructions⚠WARNING Do not over pressurize the system.Release the pin lock to unwind the hose. Replace the pin in the lock position after the hose has beenrolled out.After Each Use⚠WARNING Be sure the pin lock is in the locked position, especially if the unit will be moved.Clean and wipe down your hose reel as necessary.MaintenanceMaintain the product by adopting a program of conscientious repair and maintenance. It isrecommended that the general condition of any tool be examined before it is used. Keep your hosereel in good repair. Keep all cutting tools sharp and clean. Keep handles dry, clean, and free from oiland grease.TroubleshootingUse the table below to troubleshoot problems before contacting service personnel or your localdealer. If the problem continues after troubleshooting, call your local dealer for assistance.Failure Possible Cause Corrective Actionswivel leaksnormal wear and tear rebuild swivelover pressurization rebuild swivelhose leaksnormal wear and tear replace hoseover pressurization replace hose