North Star M157305Y Owner's Manual

Also see for 157305: Installation, operation and maintenance manual Installation, operation and maintenance manual Owner's manual Installation, operation and maintenance manual Instructions for setup

North Star M157305Y Owner's Manual Manual pdf 6 page image

6Component Identification1. Exhaust Vent: Provides an exit for burner exhaustgases.2. High Pressure Water Outlet: A passage for waterto exit pump and enter the hose.3. Motor: Electric motor powers the pump.4. Burner: The oil burner is preset and performancetested at the factory. The Burner may need initialadjustment for peak performance. See “Oil BurnerAdjustment” section for instructions on initialadjustment of the oil burner. You will need to usethe handle to tip the pressure washer up in order toaccess the Burner from underneath.5. Fuel Fill Cap: Vented cover for fuel tank.6. Fuel Tank: The Burner has an 8.25 gal. fuel tank-kerosene, #1 or #2 diesel, or fuel oil may be used.Do not mix fuel types.7. Control Box: Flat surface for mounting switches.8. Flow Switch: Water activated switch to control onand off of burner.9. Pump: A mechanical device that moves andpressurizes fluid. [Pump oil must be changed afterfirst 40 hours of use, and then changed every threemonths or 500 hours of use. See “Maintenance andRepair” section for pump oil change instructionsand recommendations.]10. Gun Hooks: Spray gun storage location.12345678910111213 14151616171918