Assembly (continued)15Step Eight: Connect remote switch to vehicle batteryWARNINGBatteries are hazardous because they contain caustic acid, can emit explosivegases, and can cause electric shock.Caution must be exercised when making connections to a battery to avoid shockand contact with the acid, and to prevent any sparking that could lead to anexplosion.ALWAYS follow the safety instructions and steps listed below in exact sequencewhen connecting the sprayer's remote switch to the battery terminals.1. Preparatory safety Preparatory safety steps: ALWAYS use eye protection NEVER smoke or work near sparks or other sources of ignition. NEVER touch both battery terminals at the same time or with any non-insulated tools. If battery acid contacts skin or clothing, flush immediately with water andneutralize with baking soda.2. Connect remoteswitch to batteryConnect the sprayer's remote switch to the vehicle battery using thefollowing procedure:a) Disconnect the vehicle battery ground wire.b) Connect the remote switch's red battery clamp to the positive(+) terminalof the battery.c) Connect the remote switch's black battery clamp to the negative(-) terminalof the battery.d) Reconnect the vehicle battery ground wire.WARNING: Always connect in this sequence to avoid possible shock.3. Connect remoteswitch to pumppower cordConnect the remote switch to the pump power cord:Note: Make sure the power switch is in the OFF position on the remote switch.03162Remote SwitchPump power cord