Northern Industrial Tools BLACK NICKEL 1/4" AIR ANGLE DIE GRINDER User Manual
       | |
Page: 3 of 7Read and understand all instructions.Failure to follow all instructions listed in the following pages may result in electric shock, fire,and/or serious injury.1. Keep your work area clean and well lit. Cluttered benches and dark areas inviteaccidents.2. Do not operate pneumatic tools in explosive atmospheres, such as in the presenceof flammable liquids, gases, or dust. Pneumatic tools create sparks which may igniteflammables.3. Keep bystanders, children and pets away while operating a pneumatic tool.Distractions can cause you to lose control. Protect others in the work area from debris suchas metal filings and sparks. Provide barriers or shields as needed.1. Stay alert. Watch what you are doing, and use common sense when operating apneumatic tool. Do not use a pneumatic tool while tired or under the influence of drugs,alcohol, or medication. A moment of inattention while operating pneumatic tools may resultin serious personal injury.2. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and glovesaway from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.3. Avoid accidental starting. Be sure the trigger is off before connecting to the air supply.Carrying pneumatic tools with your finger on the trigger, or connecting pneumatic tools tothe air supply with the trigger on, invites accidents.4. Remove adjusting keys or wrenches before turning on the tool. A wrench or a key thatis left attached to a rotating part of the tool may result in personal injury.5. Do not overreach. Keep proper footing and balance at all times. Proper footing andbalance enables better control of the tool in unexpected situations.6. Use safety equipment. Always wear ANSI-approved safety glasses underneath a full faceshield, and hearing protection.1. Use clamps or other practical ways to secure and support the workpiece to a stableplatform. Holding the work by hand is unstable and may lead to loss of control. Only workon a workpiece that is properly secured.2. Do not force the tool. Use the correct tool for your application. The correct tool will do thejob better and safer at the rate for which it is designed.3. Do not use the power tool if the trigger does not turn it on or off. Any tool that cannot becontrolled with the trigger is dangerous and must be replaced.4. Disconnect the air hose from the tool before making any adjustments, changingaccessories, or storing the tool. Such preventive safety measures reduce the risk ofstarting the tool accidentally.5. Store idle tools out of reach of children and other untrained persons. Tools are dangerousin the hands of untrained users.6. Maintain tools with care. Do not use a damaged tool. Tag damaged tools “Do not use” untilrepaired.Work AreaPersonal SafetyUse and Care |
Related manuals for Northern Industrial Tools 120206
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine