Norwood NOR-HNA1000-SO Manual
     | |
Installation Instructions• If the cabinet is locked when first opened, the external power supply can be used to access it.• Slide the cover back and install four AA batteries, as illustrated on the bottom of the case.• Plug the connector into the bottom of the keypad.• After the lock start-up cycle is complete, press 1111# on the keypad. The display should now sayOPEN.• Turn the handle to open cabinet.• The manual key entry procedure on page 5 can also be used.Step 1 – Insert Batteries• Open the cabinet and remove the cover to the internal battery case by unscrewing the twoscrews at the rear of the rubber mat.• Insert the four AA batteries as illustrated on the bottom of the case.• Replace the cover.2 |
Related manuals for Norwood NOR-HNA1000-SO
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine