Notifier NFS2-3030/E Installation Manual

Also see for NFS2-3030: Operation manual Operating instructions Operation and maintenance manual

Contents

Notifier NFS2-3030/E Installation Manual Manual pdf 12 page image

12 NFS2-3030/E Installation Manual — P/N 52544:N1 07/18/2014System Overview System Components2.1.2 OptionsRefer to Section 2.2 “System Components” for descriptions of the various optional modules.• Rubberized keypad with a standard “QWERTY” keyboard layout, a 640-character LCDdisplay, indicator LEDs, and switches.• Separately ordered Loop Control Modules and Loop Expander Modules provide up to tenSLC loops.• Optional equipment includes: ACS devices, UDACT/UDACT-2 Universal Digital AlarmCommunicator/Transmitter, ACM-8R remote relay module to provide additional relay points,and audio/voice components.2.1.3 System LimitationsSystem expansion must take into consideration the following:1. The physical limitations of the cabinet configuration.2. The electrical limitations of the system power supply.3. The capacity of the secondary power source (standby batteries).2.2 System ComponentsCentral Processing Unit (CPU) and Keypad/Display The central processing unit for theNFS2-3030 system can be ordered with a keypad/display (P/N CPU2-3030D) or without akeypad/display (P/N CPU2-3030ND). CPU2-3030D serves as “primary display” version for ULCapplications. CPU2-3030ND is intended for use in network applications; LEDs and momentaryswitches on the printed circuit board mimic those on the keypad to enable operation and trouble-shooting at the panel when it is used without a local primary display.Power supply The main power supply is AMPS-24/AMPS-24E, which provides +24 VDCpower and a battery charger for a basic system. Auxiliary power supplies and/or battery chargersare available to customize large systems.Enclosures Four cabinet sizes are available; doors and backboxes are ordered separately. “A”size backboxes hold one row of modules, “B” size backboxes hold two rows, “C” size backboxeshold three rows, and “D” size backboxes hold four rows. See Section 2.4 “System Cabinets” forbasic description. A variety of dress panels, trim rings, and blank modules are available toaccompany specific combinations of system equipment; contact Notifier for a complete parts list.SLC Loops: LCM-320, LEM-320 To provide one SLC loop, connect one LCM-320 to thepanel. Connect an LEM-320 to the LCM-320 to provide a second loop. Up to five pairs of modulescan be installed on the panel to provide a maximum of ten SLC loops.Network Connection Connect a wire or fiber version of the NCM or the HS-NCM to provide aconnection to the Noti•Fire•Net (network version 5.0 or higher) or High-Speed Noti•Fire•Net.! WARNING: UL 9TH EDITION COMPLIANCETHIS PRODUCT HAS BEEN CERTIFIED TO COMPLY WITH THE REQUIREMENTS IN THESTANDARD FOR CONTROL UNITS AND ACCESSORIES FOR FIRE ALARM SYSTEMS, UL 8649TH EDITION. OPERATION OF THE NFS2-3030/E WITH PRODUCTS NOT TESTED FOR UL 8649TH EDITION HAS NOT BEEN EVALUATED AND MAY NOT COMPLY WITH NFPA 72 AND/ORTHE LATEST EDITION OF UL 864. THESE APPLICATIONS WILL REQUIRE THE APPROVAL OFTHE LOCAL AUTHORITY HAVING JURISDICTION (AHJ).THIS MANUAL MENTIONS PRODUCTS THAT HAVE RECEIVED UL 864, 9TH EDITIONCERTIFICATION, AND ALSO MENTIONS PRODUCTS THAT HAVE NOT. FOR A COMPLETELIST OF ALL PERIPHERALS THAT CAN BE USED WITH THIS FIRE ALARM CONTROL PANEL(FACP), AND WHICH OF THOSE PERIPHERALS HAVE NOT RECEIVED UL 864, 9TH EDITIONCERTIFICATION AND MAY ONLY BE USED IN RETROFIT APPLICATIONS, SEE SECTION 2.5,“COMPATIBLE EQUIPMENT”, ON PAGE 17.