2134Loading the DishwasherLower Rack Upper RackLoad for 12 Standard SettingsBefore placing the dishes in the dishwasher, remove the largerfood particles to prevent the filter from becoming clogged.If the pots and pans have baked-on food that is extremely hard toremove, we recommend they are soaked before washing. This willeliminate the need for extra wash cycles.Pull out the rack to load the dishwasher.The lower rackPlace the most difficult to clean items on the bottom rack: pots,pans, lids, serving dishes and bowls.It is preferable to place serving dishes and lids on the sides of theracks in order to avoid blocking the rotation of the top spray arm.- Pots, serving bowls, etc. must always be placed face down.- Deep pots should be tilted to allow the water to flow out.The upper rackThe upper rack is designed to hold more delicate and lighter dishes,such as glasses, cups and saucers, plates and small bowls.- Position the dishes so that they do not get moved by the spray ofwater.To adjust the height of the upper rack, rotate the caps located onthe end of the rack guide rails to the side, remove the rack com-pletely and refit using the alternate set of whells (see fig.B).Adjust the upper basket to the higher level to allow more height inthe bottom basket for large items.fig.Bfig.A.4.GB