HOW TOASSEMBLE YOUR1234Remove all parts from box:Two arm rest frames, 2 adjustment legs & 1 bracket.Place the toilet safety frame bracket between the toilet openingand the tank with the rounded part of the bracket closest to thetank. The holes on the bracket should line up with the mountingholes on the toilet.Remove the existing toilet seat and lid from toilet by unscrewing the screws locatedat the rear of the seat.Replace the toilet seat and lid and reinsert screws through the bracket and thenthrough the toilet.Toilet Safety RailsItem # 8200, 8200-R, 8200-SCapacity not to exceed 250 lbs.QUICK ASSEMBLYFollow theseSIMPLE STEPSHOW TO USE YOURToilet Safety Rails1 When getting on and off the toilet use the toilet safety rails for extra stability. Makesure to not apply all of your body weight, as this product is for assistance only.Arm Rest FramesAdjustment Legs Bracket576Attach adjustment legs to each arm frame. Push in on brass pin and slide the adjust-ment leg onto the frame until the brass pin engages into the first hole.Remove star knobs & insert side frames into the bracket. Adjust to the desired widthand reinsert star knobs to lock side frames in place.8 Adjust the height of the legs by depressing the push-button and sliding the leg upor down to the desired height. Make sure both legs are fully engaged and adjustedto equal heights. (Arm rests should be parallel to the ground)Place the frames next to the toilet and turn the small “L” shaped tube towards thetoilet until the brass pins engage into the arms.