234*Revised April 15, 2019HOW TO ASSEMBLE YOURFollow theseSIMPLE STEPSNO tools requiredQuick assemblyWHAT’S INCLUDEDa. (1) Commodeframe with seatand lidItem # 8900WCapacity not to exceed 300 lbDROP ARM COMMODEPlace commode on front side.Depress push buttons on backrest,and insert into the backrest receiverslocated on the bottom of the seatplatform. Ensure push buttons arefully engaged and check by pullingupward (see Figure 1).To lower the drop arms, pushin the red spring-loadedrelease button and swing droparm down (see Figure 3).To raise the drop arms, swingdrop arm up until the redspring-loaded release buttoncompletely pops out and islocked (see Figure 4).a. b. c. d.1Adjust the height of the legs bydepressing the push button on eachleg and sliding the legs up or downto desired height (see Figure 2).NOTE: Legs must be adjusted tosame height so commode sits level.Figure 2Figure 1Figure 4Figure 3b. (1) Backrestc. (1) Bucket with lidd. (1) Splash guard