NovaSail NS SUNTRACK Operating Manual
                            | |
Contents
| 
NS-SunTack Operating Manual14SET modeThe SET mode allows for the adjustment of your parameterssequentially as follows: Bar graph resolution Screen contrast Display refresh rate Heading sensitivity Installation offset Angle reference auto/manual recording Embedded firmware version Factory/user/launch of the compass calibrationTo enter the SET mode: Your device must be switched OFF. Press first then simultaneously. The device will enter thesetup menu: SET will be displayed on the upper line Each parameter is displayed on the lower line. The required value isadjusted by the buttons and . The parameter is memorized when you press . The SET mode is exited automatically at the end of the sequence or byswitching off the device (the current setting is memorized when switchingoff).Name Display DescriptionBar graphresolutionbAr 1 to 10 degrees, adjustableLCD contrastlevelCon Level 1 to 7 (default 2)Advanced operations |
Related manuals for NovaSail NS SUNTRACK
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine