NS360 Operating Manual 13TIMER modeThis mode offers a countdown timer which can be set from 1 to 9 minutes.When counting down, a short beep sounds :• each minute until the last minute• each ten seconds until 10 seconds• each second until the start timeAt the start time :• a long beep sounds• the timer starts counting the race duration in minutes and hoursAdjust, start and stop the TIMER :• Adjust the timer value with the arrows .• Press to start and stop the TIMER.Resynchronize the TIMER to the nearest minute :When the TIMER is running, at any time, you can resynchronize to the upper orlower minute• Press the arrow to resynchronize the value to the upper minute.• Press the arrow to resynchronize the value to the lower minute.Note : The timer continues to count down until you press to stop it, evenduring resynchronization. When stopped, the display blinks and the timer remainsfrozen.Note : After the start, the timer will switch automatically to the mode defined inthe SET mode. Please refer to the Advanced Operations “Exit Timer mode”, page21 for more details. (The default value of the Exit Timer mode parameter is “SP”mode).Operations