Taurus Series Multimedia Player T30 Specificationswww.novastar.tech 10Not applicable. The module is a Single module and complies with the requirement of FCC Part 15.212. Trace antenna designsNot applicable. The module has its own antenna, and doesn’t need a host’s printed board micro strip traceantenna etc. RF exposure considerationsThe module must be installed in the host equipment such that at least 20cm is maintained between the antennaand users’ body; and if RF exposure statement or module layout is changed, then the host product manufacturerrequired to take responsibility of the module through a change in FCC ID or new application. The FCC ID of themodule cannot be used on the final product. In these circumstances, the host manufacturer will be responsiblefor re-evaluating the end product (including the transmitter) and obtaining a separate FCC authorization. AntennasAntenna Specification are as follows:Type: Helix AntennaGain: 5.03 dBiThis device is intended only for host manufacturers under the following conditions: The transmitter module maynot be co-located with any other transmitter or antenna; the module shall be only used with the internalantenna(s) that has been originally tested and certified with this module. The antenna must be eitherpermanently attached or employ a ‘unique’ antenna coupler.As long as the conditions above are met, further transmitter test will not be required. However, the hostmanufacturer is still responsible for testing their end-product for any additional compliance requirementsrequired with this module installed (for example, digital device emissions, PC peripheral requirements, etc.). Label and compliance informationHost product manufacturers need to provide a physical or e-label stating “Contains FCC ID: 2AG8JT60” withtheir finished product. Information on test modes and additional testing requirementsOperation Frequency: 2412-2462 MHzNumber of Channel: 11Modulation: DSSS, OFDMHost manufacturer must perform test of radiated & conducted emission and spurious emission, etc. according tothe actual test modes for a stand-alone modular transmitter in a host, as well as for multiple simultaneouslytransmitting modules or other transmitters in a host product. Only when all the test results of test modes complywith FCC requirements, then the end product can be sold legally. 2.10 Additional testing, Part 15 Subpart Bdisclaimer. The modular transmitter is only FCC authorized for FCC Part 15 Subpart C 15.247 & 15.209 and thatthe host product manufacturer is responsible for compliance to any other FCC rules that apply to the host notcovered by the modular transmitter grant of certification. If the grantee markets their product as being Part 15Subpart B compliant (when it also contains unintentional-radiator digital circuity), then the grantee shall providea notice stating that the final host product still requires Part 15 Subpart B compliance testing with the modulartransmitter installed.