NOVAsomM7 Hardware User ManualN.M7-250518-HUM-M7-V1.2 Page 14 of 25www.novasomindustries.comEurope | Asia | America5.2 Recommended operating conditionsVINHIGH 6.5V to 12.5 Vcc (up to 18Vcc for t < 100 uSec.)3.3V pin input voltage (2) 0V to 3.3VBattery Voltage Input 0V to 4.3V3.3V pin output voltage (2) 0V to 3.3VInput clamp current for 3.3V pin (2) ±2mATable 4 : Recommended operating conditions5.3 Power consumption and power dissipationAll measurements are done with an input voltage of 12V with Android 8.1 and an HDMI monitor @1920x1080.• Boot phase : 200 mA• Running : 170 mA Suspend to memory : 110 mA• Freeze to memory : 20 mAFor the details of the low power modes consult the Rockchip RK3328 Reference Manual5.4 USB relevant standards• Universal Serial Bus Specification, Rev. 2.0 (Compaq, Hewlett-Packard, Intel,Lucent, Microsoft, NEC,Philips; 2000)• On-The-Go and Embedded Host Supplement to the USB Revision 2.0 Specification (Hewlett-PackardCompany, Intel Corporation, LSI Corporation, Microsoft Corporation, Renesas ElectronicsCorporation,ST-Ericsson; 2012).6 : Operational characteristics6.1 : Development system requirementsFrom the NOVAsom Industries web site www.novasomindustries.com the user can download theNOVAsom SDK to ease the development process for all the NOVAsom Industries boards.The NOVAsom M7 board is currently supported at the boot level, and there is the standard BSP support in