98 Novell Access Manager 3.1 SP1 Administration Console Guidenovdocx (en) 19 February 20106.7.5 Performing Component-Specific ProceduresIf you have installed the following components, perform the cleanup steps for the component: “Third Administration Console” on page 98 “Linux Access Gateways” on page 98 “Linux Identity Server” on page 100 “Windows Identity Server” on page 101 “Linux J2EE Agents” on page 101 “Windows J2EE Agents” on page 101 “SSL VPN” on page 102 “Old Primary Administration Console” on page 103Third Administration ConsoleIf you installed a third Administration Console used for failover, you must manually perform thefollowing steps on that server:1 Open the vcdn.conf file.Linux: /opt/novell/devman/share/confWindows: C:\Program Files\Novell\Tomcat\webapps\roma\WEB-INF\conf2 In the file, look for the line that is similar to the following:10.1.1.1In this line, 10.1.1.1 represents the failed primary Administration Console IP address.3 Change this IP address to the IP address of the new primary Administration Console.4 Restart the Administration Console by entering the following command from the commandline interface:Linux: /etc/init.d/novell-tomcat5 restartWindows: net stop Tomcat5Then, net start Tomcat5Linux Access GatewaysFor each Linux Access Gateway imported into the Administration Console, you must edit theconfig.xml file and the settings.properties file on the Access Gateway and edit the currentconfig and working config XML documents in the configuration store on the new primaryAdministration Console.1 At the Linux Access Gateway, log in as the root user.2 Open a terminal window and shut down all services by entering the following commands:/etc/init.d/novell-jcc stop/etc/init.d/novell-tomcat5 stop/etc/init.d/novell-vmc stop3 If you are running SSL VPN, enter the following command to stop SSL VPN:/etc/init.d/novell-sslvpn stop
