34 Novell Access Manager 3.1 SP2 SSL VPN Server Guidenovdocx (en) 16 April 20103 To configure a DNS server, click New in the DNS Servers section, specify the IP address of theserver, then click OK.4 To configure a domain, click New in the Domains section, specify the domain name, then clickOK.5 To delete a DNS server or a domain, select the check box next to the field and click Delete inthe section.6 To save your modifications, click OK, then click Update on the Configuration page.2.5.2 Configuring DNS Servers for Kiosk ModeThe DNS servers can be configured for Kiosk mode during installation or by using YaST after theinstallation. The configuration procedure depends on whether you have installed SSL VPN and theLinux Access Gateway on the same machine or on separate machines.NOTE: You must configure the DNS server for both Kiosk mode and Enterprise mode. Forinformation on configuring DNS servers for Enterprise mode, see “Configuring DNS Servers forEnterprise Mode” on page 33. “Configuring DNS Servers during Installation” on page 34 “Configuring DNS Servers after the Installation” on page 34Configuring DNS Servers during InstallationIf you are installing SSL VPN and the Linux Access Gateway on the same machine, you canconfigure DNS servers during the Linux Access Gateway installation. For more information, seeInstalling the Linux Access Gateway Appliance in the Novell Access Manager 3.1 SP2 InstallationGuide (http://www.novell.com/documentation/novellaccessmanager31/installation/?page=/documentation/novellaccessmanager31/installation/data/bookinfo.html).Configuring DNS Servers after the InstallationIf you are installing SSL VPN and the Linux Access Gateway on separate machines, you canconfigure DNS servers in the /etc/resolv.conf file by using YaST as follows:1 In YaST, select Network Devices > Network Cards, then press Enter.2 Select Change, then press Enter.3 Select Edit, then press Enter.
