Installing or Upgrading Novell eDirectory on Linux 67novdocx (en) 11 July 2008Configuring eDirectory 8.8 Multiple Instances Through YaST After UpgradeAfter installing eDirectory 8.8, to configure the eDirectory 8.8 server, complete the followingprocedure:1 Click on Network Services in the YaST Control Center screen.2 Select eDirectory.This invokes the eDirectory configuration.3 Select Create Instance.4 Create the new instance in a new or existing tree.To create the instance for a new tree do the following:4a Select New Tree4b Enter the name of the tree4c Click NextThe eDirectory Configuration - New Tree Information screen is displayed.4d Enter the admin name with context.For example, cn=admin.o=novell4e Enter the password and confirm it.4f Click Next.The eDirectory Configuration - Instance Information screen is displayed.5 To add the instance to an existing tree, do the following:5a Select Existing Tree.5b Enter the name of the existing tree.5c Click Next.The eDirectory Configuration - Existing Tree Information screen is displayed.5d Enter the hostname along with the NCP and secure LDAP port numbers.5e Enter the admin FDN.For example, cn=admin.o=novell5f Enter the password.5g Click Next.The eDirectory Configuration - Instance Information screen is displayed.6 Enter the instance details, such as, server context, server name, instance, dib, and configurationlocations.7 Specify the NTP and SLP settings.3.6.5 Nonroot User Installing eDirectory 8.8A nonroot user can install eDirectory 8.8 using the tarball.
