Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual

Also see for ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - NETWORK DISCOVERY DATABASE STRUCTURE: Manual Reference guide Command reference guide Deployment guide Getting started guide

Contents

Novell ZENWORKS 10 CONFIGURATION MANAGEMENT SP3 - PREBOOT SERVICES AND IMAGING REFERENCE 10.3 16-04-2010 User Manual Manual pdf 238 page image

238 ZENworks 10 Configuration Management Preboot Services and Imaging Referencenovdocx (en) 16 April 2010Command DetailsTable F-14 Dump Mode Commands and ParametersExamplesTable F-15 Dump Mode ExamplesF.9 Information ModeUse the -info mode command to view the following: The data currently stored in the image-safe area on the deviceThis data is saved by the Novell ZENworks Configuration Management Imaging Agent(novell-ziswin) during each device’s session to ensure that it can be restored after the device isreimaged. If the device is new and doesn’t have an operating system yet, an initial set of data issupplied from the default configuration for the ZENworks Management Zone, such as IPaddresses. Information about the hardware devices on the deviceThis information is detected during the imaging boot process. If the ZENworks Imaging Engineruns in auto-imaging mode, this information is sent to the Imaging Server to help determinewhich image to restore to the device, if necessary. Name of the base image that was last restored on the deviceTo use the Information mode: Section F.9.1, “Using the ZENworks Imaging Engine Menu to View Device Information,” onpage 239 Section F.9.2, “Using the Imaging Maintenance Mode Prompt to View Device Information,” onpage 239Parameter Action-dump Lists the existing partitions on all local hard drives. For each partition, the type,size, and slot number of the partition are given.The ZENworks partition and Dell or Compaq configuration partitions are notlisted.-geo Displays additional information about the geometry (cylinders, heads, andsectors) and capacity of each hard drive.Example Explanationimg -dump Lists the current partitions on all local writable devices.img -dump -geo Lists all hard drives, their geometry and capacity, and the current partitions onthe writable devices.