Now Technologies GyroSet Vigo User Manual
                                       | |
Contents
| 
Setting up the SystemSetting up the Omni and the GyroSet LinkPlease find our tutorial videos on https://www.nowtech.hu/tutorials/GyroSet Link and the GyroSet Cubo enables GyroSet Vigo users to use their GyroSet Vigo on aPGDT Omni or IOM equipped wheelchair as a specialty input device (SID). The Omni is auniversal specialty controls interface that accepts signals from many different types of SIDs andtranslates them into commands compatible with the PG Drives Technology R-Net controlsystem.Programming the OmniFor programming the Omni please follow the instructions provided by Penny and Giles DriveTechnologies. There are three methods of programming the Omni. Details ofthe actual programmable parameters are given in the SK78813 Programming chapter. Ensurethe R-Net Control System’s Drive, Acceleration and Deceleration settings are at a comfortableand safe level prior to attempting to program the Omni to suit the user.Refer to the R-Net Technical Manual SK77981 or the On-Board Programming Manual SK78571for details of how to program the R-Net Control System. Programming should only be conductedby professionals with in-depth knowledge of PG Drives Technology electronic control systems.Incorrect programming could result in an unsafe set-up. Now Technologies Ltd. accepts noliability for losses of any kind if these conditions are not met. |
Related manuals for Now Technologies GyroSet Cubo
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine