24en8.2 frequently asked QuestionsQuestion 1:During power on, why does the TV will have a short flashing, blue screen or screensaver?answer:This is normal, when the system initializes, it will setup the corresponding parameters so it can outputthe correct video signal to the TV, during the initializing time, the TV will receive incorrect signals or thesignals will not be stable and will cause the TV screen to flash, some TV's will treat this as no signal, andwill display a blue screen or screensaver.Question 2:Why when I switch to Y/Pb/Pr 480p, 576p, 720p, 1080i, and 1080p, does the TV screen display an un-watchable picture?answer:Please check if your TV supports Y/Pb/Pr 480p, 576p, 720p, 1080i, and 1080p output, if your TV doesnot support, please use the A/V signal display instead, press the TV SYSYEM button on the remote con-trol, then switch the TV's video input to NTSC or PAL.Question 3:Why is there no sound on movie or music playback when using Y/Pb/Pr component output?answer:Y/Pb/Pr output is a video output only, and does not include sound signals. When using Y/Pb/Pr output,please plug the A/V OUT or the S/PDIF jack to output sound.Question 4:I cannot get SSID name, the screen always displays: Can't get any SSID!answer:When the WLAN USB Adapter is connected to the player, it needs some time to get initialized. Please waitfor about 1-2 minutes and try refreshing the SSID list again.Question 5:When the WLAN USB Adapter is connected to the player, it needs some time to get initialized. Please waitfor about 1-2 minutes and try refreshing the SSID list again.answer:Please check following items:1) Connect the player to network and obtain an IP address first;2) Please enable NetBIOS of TCP/IP on computer;3) Please check your PC's firewall settings;4) Please enable your PC's 'Guest' account;5) Please share the folders which you wish to browse on your PC, and make sure that 'Everyone'or 'Guest' has the right to access.