Noyes OPM4 User Manual
                                      | |
Contents
| 
16The current measurements are stored in the next available memory location (next Fiber) of the current5.File.Recall Mode: To View Stored RecordsPress and hold the1. Arrow/File key to enter File mode and select the desired File to view.Press the Recall key to display the Recall mode screen.2.Once the Recall key is pressed and before entering the Recall mode screen, the number of currently3.open file A and number of fibers B stored in the current file will flash for ~ 1.5 seconds.FILEFIBS224 ABOnce in the Recall mode screen, the display changes to show the following data:4.0.22 0.221310 1310dB dBnm4 4FIBR FIBRWAVE IDAB ECD nmHzA - Fiber number, B - Wavelength, C - Stored test result,D - WAVE ID icon if WAVE ID was active when the measurement was taken,E - Hz icon, if Tone was active when the measurement was taken.Use the5. / arrow keys to increment/decrement the fiber number and view the test result stored inthis location.Press and hold the• arrow key to go to the last fiber.Press and hold the• arrow key to go to the first fiber.For multiple-Wave test results, press the wavelength• key to change wavelengths.Press the Recall key to exit.6.Press the Store key to exit the File mode.7.Note: you can go directly to the Recall mode for the current file by pressing the Recall key from the Testscreen.OPM5 Models |
Related manuals for Noyes OLS1-Dual
manualsdatabase
Your AI-powered manual search engine