SPECIFICATION SHEETREFERENCE QTY. REMARKS ProjectLocationArchitectEngineerContractorSubmitted by DateBroan-NuTone LLC, 926 West State Street, Hartford, WI 53027 (1-800-637-1453)70E 99043997ATYPICAL SPECIFICATIONRange hood shall be Broan RP1 Series.Unit shall have a backdraft damper and be ductedvertically (horizontally) to the outside.Unit shall have washable micromesh aluminum filters.Unit shall have a permanently lubricated, dual centrifugalblower resiliently mounted and controlled with an infinitespeed, solid state control. RPM not to exceed 1625.Hood shall have a two-speed rocker control and aseparate, two-position light switch. Sides shall be straightand bottom hemmed - with no sharp edges. Stainless steelshall be 24-gauge, 430 series.Air delivery shall be no less than 440 cfm and sound levelsno greater than 7.0 Sones. All air and sound ratings shallbe certified by HVI.Unit shall be U.L. and cU.L. listed.Designed to meet the performance needs oftoday's conventional cooking appliances.FEATURES• Two-speed rocker control with solid state blowermemory• Two-position light switch for "bright" or "night-light"illumination• Dual halogen lamps with stainless steel trim rings(50W GU10 - MR16 lamps, purchase separately)• High efficiency dual centrifugal blower with resilientanti-vibration motor mounts• Broan Heat SentryTM - automatically turns blower tohigh speed when excess cooking heat is detected• Two washable, micromesh aluminum grease filters• Hemmed bottom for safety and good looks• Damper/duct connector included• Professional styling in Stainless Steel, Black and White• Available in 30" and 36" widths• Replacement filters (package of 2):- Grease - 97017455 (BPRPFA)SPECIFICATIONSMODEL RP1 SERIESPRO-STYLERANGE HOODSONES CFMVOLTS AMPS RPM VER. HOR. VER. HOR. DUCT120 7.0 1625 7.0 7.0 440 440 3¼" x10"HVI-2100 ceRTIfIed RaTIngs comply withnew testing technologies and proceduresprescribed by the Home Ventilating Institute, foroff-the-shelf products, as they are available toconsumers. Product performance is rated at 0.1in. static pressure, based on tests conducted inaMca’s state-of-the-art test laboratory. sonesare a measure of humanly-perceived loudness,based on laboratory measurements.