NuTone SFDB-DD Operating Instructions Manual

Contents

NuTone SFDB-DD Operating Instructions Manual Manual pdf 8 page image

7. GROUNDING INSTRUCTIONSThis appliance must be grounded. If it should malfunction or break down, groundingprovides a path of least resistance for electric current, to reduce the risk of electricshock. This appliance is equipped with a cord having an equipment-groundingconductor and grounding plug. The plug must be inserted into an appropriate outletthat is properly installed and grounded in accordance with all local codes andordinances.This appliance is for use on a nominal 120-volt circuit and has a grounding attachmentplug that looks like the plug illustrated below. Make sure that the appliance isconnected to an outlet having the same configuration as the plug. No adaptershould be used with this appliance.1. Using pliers, install both crimp connectors (included) to low voltage wire(22 gauge minimum, 2-conductor, model V133, not included).2. Connect low voltage wire to tabs located on outside of the power unit.3. The power unit is equipped with a 6-foot grounded cord. Plug cord into120-volt grounded receptacle.Improper connection of the equipment-grounding conductor can result in arisk of electric shock. Check with a qualified electrician or service person ifyou are in doubt as to whether the outlet is properly grounded. Do notmodify the plug provided with the appliance — if it will not fit the outlet,have a proper outlet installed by a qualified electrician.WARNING!- 8 -NOTE: INLET LEADS TO BE CONNECTED TO POWER UNIT LOW VOLTAGE TABS USING CRIMP CONNECTORS(INCLUDED) AND LOW VOLTAGE HARNESS .AE0032GROUNDING PINPOWERCORDPOWER UNITINLETLEADSINLET INLET INLETMODEL V133 (22/2)LOW VOLTAGE WIRETOOTHERINLETSLOW VOLTAGE TABSOVERCURRENTPROTECTOR BUTTONCRIMP CONNECTORSGROUNDEDOUTLETSGROUNDEDOUTLET BOX