Num'axes CANIBEEP RADIO PRO User Manual

Also see for CANIBEEP RADIO PRO: User guide

Num'axes CANIBEEP RADIO PRO User Manual Manual pdf 26 page image

GB - 26z First use from newActivate/deactivate the remote controlRemote control is supplied with battery fi tted. As soon as the battery is in place, the remotecontrol is ready for use. If the remote control is not to be used for a long period or if you wish toturn it off, you should remove the battery from its housing.Fitting the battery in the CANIBEEP RADIO PRO collar– Unscrew the 4 screws of the top of CANIBEEP RADIO PRO collar using a Phillips screwdriver.– Insert the battery (3V lithium CR123A) paying attention to follow polarity indicated on thebattery housing.– A beep sound (low pitch) is emitted and the red indicator flashes, indicating the battery hasbeen properly inserted.– Put the top cover back in place in the right way. Check that the LED window is located rightabove the indicator LED inside the collar (See Diagram 1). Ensure that the rubber seal is inits groove, and check that both rubber seal and groove are clean in order to avoid any watertightness problem.– Firmly screw up the 4 screws in order to maintain your product’s water tightness.You can now turn your CANIBEEP RADIO PRO collar On.Fitting the strapDiagram 4m 4312