Num'axes CANICOM 800 User Manual

Also see for CANICOM 1500 PRO: User guide User guide User guide

Contents

Gb - 26- dog 1 (black collar), dog 2 (yellow collar), dog 3 (orange collar) or dog 4 (blue collar) forCANICOM 1500To select the dog you want to train on the remote control:For CANICOM 800: Press the A or B key in order to select the collar (the letter A or B will appear on theLCD screen).For CANICOM 1500: Press the 1, 2, 3 or 4 key in order to select the collar (the number 1, 2, 3 or 4 willappear on the LCD screen). Button : beeperIf you press the « Beeper » button the collar will emit sound signals. There is no time limit for thisfunction: the beeper will continue to sound for as long as the button is pressed.A « transmission » symbol will appear on the LCD screen of the remote control; the indicator light on thecollar goes from flashing green to permanent green for as long as the button is pressed.It’s up to you to use the beep key depending on the way you want to train your dog. With the beeper youcan:- send a sound to your dog when it is disobedient,- draw its attention,…It’s very important to always use the beeper in the same way in order not to disturb your dog. “F” button: Flash stimulationPress the « F » button to send a warning to your dog using stimulations transmitted by the two contactpoints located on the receiver collar for a defined length of time of less than one second.A « transmission » symbol will appear on the LCD screen of the remote control; the indicator light on thecollar goes from flashing green to permanent red while the stimulations are being sent. “C” button: Continuous stimulationPress the « C » button to send a warning to your dog using stimulations transmitted by the two contactpoints located on the receiver collar, this will last for as long as the button is pressed but limited to 8seconds maximum. “B” button : boosterPress the Booster button to stop your dog instantaneously.You can choose the level of stimulation you think to be the best for an immediate effect. As a result, youdo not need to press the “+” button.Those stimulations are transmitted by the two contact points located on the collar for as long as thebutton is pressed but no more than 8 seconds max.The level of stimulations selected thanks to the “Booster” button can be different for each collar.