Num'axes Canicom 200 User Manual

Also see for Canicom 200: User guide Technical support

Contents

Num'axes Canicom 200 User Manual Manual pdf 25 page image

Gb - 25Maintenance- Avoid cleaning the unit with volatile liquids such as solvents or cleaning fluids. Use a soft cloth andneutral detergent.- In order to maintain water tightness, we recommend the replacement of the seal located in the receivercollar every year.TroubleshootingShould your CANICOM 200 stop working or develop a fault, first read this user’s guide over, then checkthe batteries and replace them if necessary and retry. Also check that you are using the product correctly.If you encounter any problem, re-code the collar with the remote control (ref. coding procedure).Re-initialise the system by removing the battery from its housing, then with a metallic tool (e.g.screwdriver, scissors) touch each of the 2 battery contacts for 2 seconds approximately (ref. Diagram 7).Insert the battery again: One beep is emitted, indicating the battery is in correct position.Restart your CANICOM using the remote control.If the problem persists, contact your distributor or check out on www.numaxes.com.You can also contact NUM’AXES at +33.2.38.69.96.27 or by Email export@numaxes.com.Depending on the extent of the malfunction, you may have to return your product for service and repair.For all repairs, please supply the following:- the complete product- the proof of purchase (invoice or sales receipt)If you omit one of these items, the After Sales Service will have to invoice you for any repair costsincurred.Diagram 7Reset: connectthe 2 supports ofthe batteryANICOM 200_Indice I_CANICOM 200 01/09/14 17:09 Page25