Num'axes EASY DOG SOFT User Manual

Also see for EASY DOG PULSE: User guide

Contents

Num'axes EASY DOG SOFT User Manual Manual pdf 3 page image

EASY DOG SOFT / EASY DOG PULSE – User’s guide – indice A 3/12● Contents and presentation of the EASY DOG PULSE Contents of the product EASY DOG receiver collar fitted with short contact points and a strap 3-V CR2 lithium battery for the collar EASY DOG PULSE remote control fitted with a 3-V CR2032 lithium battery pair of long contact points neon test lamp carry strap this user’s guide Presentation● First use from new Fitting the battery in the EASY DOG receiver collar▪ Unscrew the 4 screws of the top of EASY DOG using a screwdriver.▪ Insert the battery (3-V Lithium CR2) paying attention to follow polarity indicated on thebattery housing (ref. Diagram 5).▪ A beep sound (low pitch) is emitted, indicating the correct installation of the battery.If you do not hear any beep after having inserted the battery, remove it immediately from itshousing. Check the polarity before trying again.▪ Before putting the lid back in place, check that the rubber seal is in its groove.▪ Screw up the 4 screws with care (do not overtighten them).SVVVDiagram 4COLLARDiagram 3EASY DOG SOFTREMOTE CONTROLContact points(short or long)White mark:area where theOn/Off switchmagnet is locatedRound mark:magnet position indicatorThis magnet allows you to switchOn/Off the collar and to code thecollar with the remote control.Indicator light:On/Off indicator+ radio reception indicator+ battery level indicatorLongvibrationbuttonStimulationbuttonBeeperbuttonHighluminosityLED buttonRed indicator lights:radio transmission indicators+ stimulation level indicators+ battery level indicatorsArea where thehigh luminosityLED is locatedSealDiagram 5Polarity “-”of the batteryPolarity “+”of the battery