20ENAccessories! Not all accessories are included on some models.Use with Nuna Pipa Infant Car SeatWhen using with Nuna Car Seat , please refer to the following instructions.1 To attach adapters, place adapters onto mounts as show. A "click"sound means the adapter is locked. (31)2 To attach car seat, place car seat onto adapter as shown. (32)A "click" sound means the car seat is locked. (33)3 To remove car seat, lift the car seat upwards (34)-2 while pressingthe two stroller release buttons. (34)-14 To remove adapters, lift the adapters upwards while pullingthe two release buttons. (35)! If you have any problems using the car seat, please refer to the carseat instruction manual.! Remove car seat before folding.Use Rain CoverTo assemble the stroller rain cover, place it over the stroller seat. (37)! Always check ventilation, especially in hot weather whenthe rain cover is on the product.! Always check that the rain cover has been cleaned and dried beforefolding.! Do not fold the stroller after assembling the rain cover.! Do not place your child into the stroller assembled with rain coverduring hot weather.