Nuna ivvi series Manual

Contents

Nuna ivvi series Manual Manual pdf 8 page image

98ENENIVVI series carry cot instructions IVVI series carry cot instructionsProduct Set UpCarry Cot assemble1 - Open the wire support on both side of the carry cot. (1)Then click the wire into the four plastic parts. A ”Click”sound means the wire support is secure.(1)-1 Place themattress into the carry cot, (2) and smooth it down.(3)Always use the mattress when using the carry cot.Mattress cover can easily be removed to wash.2 - Attach the pocket to the carry cot with zipper. (4)3 - Attach the boot to the carry cot with the zippers oneither side. (5)Adjust Carry Cot hood1 - Pull hood towards front end to secure. (6)2 - Close the hood by pressing the folding buttons on eitherside. (6)-1Attach Carry Cot onto Chassis1 - Align the sides of the carry cot with the adapters on theframe.2 - Place the carry cot directly down until it clicks intoplace. (7)3 - A click sound means carry cot assembled completely.Always remove the car seat adapters before using thecarry cot.Please don’t fold stroller when carry cot is attached.Canopy Features1 - Fold the rear panel of the carry cot canopy upwards formore ventilation. (8)2 - Pull the canopy flap out from under the carry cotcanopy, then secure it to the two sides of carry cot withmagnets. (9, 10)Remove Carry Cot1 - Press release buttons on both sides of carry cot andthen lift it upwards. (11)Use Rain Cover1 - To assemble the carry cot rain cover, place it overthe carry cot, and attach the 2 pairs of hook and loopfasteners on the front of rain cover. (12)Please always check ventilation, especially in hotweather when the rain cover is on the product.Please check that the rain cover has been cleaned anddried before folding.