15inHow to use theNuna MIXXSecuring child1 To release the buckle latch, push on center button and remove the clips. (14)2 To secure child, assemble buckle. (15, 16, 17)3 Fit harness snugly to child by sliding each adjustment buckle. (18)Adjusting the shoulder harness positionTo adjust the position of the shoulder harness anchor, open the zipper of seatback, turn the anchor to be level with the side facing forward. Thread it throughthe shoulder harness slot from back to front (19). Rethread it through the slotthat is closest to child’s shoulder height (20).To avoid serious injury from falling or sliding out, always secure your child withharness.Make sure your child is snugly secured. The space between the child and theshoulder harness should be about the thickness of one hand.Do not cross the shoulder belts. This will cause pressure on child’s neck.Use CanopyTo open the canopy, pull canopy toward front. To fold the canopy, pull canopytoward back. (21)It is convenient to see the baby when open the canopy window. (22)We do not recommend that you remove the canopy. If you have any need toremove the canopy please contact nuna.