Nuna mixx2 Instructions Manual

Also see for mixx2: User manual

Contents

Nuna mixx2 Instructions Manual Manual pdf 9 page image

1716 ENENSecuring Your ChildWARNING Avoid serious injuryfrom falling or sliding out. Always use the seat belt.1 - To unfasten the buckle, push on center button andremove the clips.2 - To secure child, insert waist strap clips to harness strapclips then insert into the center buckle until it clicks.3 - To tighten harness around your child for a snug fit, slidethe adjusters on the straps. For a snug fit, the spacebetween the child and the shoulder harness should beabout the thickness of one hand.Adjusting the ShoulderHarness Position4 - Accessing the shoulder harness varies by model. Toadjust the position of the shoulder harness anchor, eitheropen the zipper on the seat back, or unfasten the snapslocated behind the storage pocket and lift up the flap.Turn the harness anchor to fit through the harness slot.Push retainer through to front of the seat.5 - From front of seat, unfasten the snap at the top of theseat pad and pull the harness strap through the seatpad.6 - Re-insert the harness strap through the desired set ofharness slots in the seat pad and seat back that areclosest to your child’s shoulders. Repeat with other strap.CHECK to MAKE SURE that you have inserted theharness straps through the same set of harness slotsfor each harness strap.Depending on model, either zip the zipper on the seatback, or close the flap and refasten the 4 snaps to theback of the seat.213465