Nuova Simonelli CUP WARMER Series User Handbook Manual

Contents

Nuova Simonelli CUP WARMER Series User Handbook Manual Manual pdf 41 page image

37Cleaning the BodyBefore carrying out any cleaning operations,set the machine to the “O” energy level,(machine switched off and plug removedfrom the mains).CAUTION: Never use solvents, abrasives orchlorine-based products.Cleaning the work area: Remove the work-top, lifting it up from the front and sliding itout. Remove the water collection dish under-neath and clean everything with hot waterand detergent. Cleaning the external surfa-ces: To clean the panels, use a soft, dampcloth.Cleaning the Delivery Unitand Milk Foamer:The MASTER/COFFEE version is alreadyequipped to wash the delivery unit. To carryout the washing cycle function, proceed asfollows:press the WASHING CYCLE key orpress the arrow key ▼ followed by theENTER key and the machine will begin awash cycle that consists of hot water delive-ries alternated with pauses. The whole cyclelasts approximately 4 minutes.We recommend that you carry out aGROUP WASHING CYCLE at least once aday in order to keep the delivery pointclean.Group washing should be carried out atleast ONCE A WEEK, using the propertablets of detergent.CAUTION: RISK OF INTOXICATION.We remind you not to interrupt a washingcycle using detergent tablets once started,otherwise detergent residues may remaininside the machine.Proceed as follows:- Insert the tablet of detergent into the doorsituated alongside the bell-jar of coffeebeans on the top cup storage surface(Fig.1, no.11).- Press the WASHING CYCLE key or thearrow key ▼, followed by the ENTER key:the machine will automatically start itswash cycle.Repeat the washing operation, this timewithout inserting the detergent tablet, inorder to eliminate any detergent resi-dues completely.- The Master Cappuccino Version is equippedto wash the milk foamer, delivery group andthe tube which takes the milk from the insideof the cooler. To carry out a completewashing cycle, proceed as follows:Remove the milk suction tube from thecontainer and position it in another contai-ner along with the proper detergent solu-tion. Insert the U-key for programming, andpress the arrow key ▼ once, followed bythe ENTER key. The display will read“COMPLETE WASH” and, when ENTER ispressed, the machine will begin to suck updetergent to clean the tubes and the milkfoamer. At the same time, the deliverygroup wash cycle will begin. When the suc-tion and detergent wash cycle have fini-shed, repeat the washing operation, thistime replacing the detergent with hot water,in order to eliminate any possible residuesfrom the tubes. We recommend that youto carry out this washing operation atthe end of every day and in any case,every time that you switch off themachine for any period of time.The group washing cycle should be car-ried out using the proper detergenttablets at least once a week.CAUTION: RISK OF INTOXICATION.We remind you not to interrupt a washingcycle using detergent tablets once started.Proceed as follows:- Insert the tablet of detergent into the doorsituated alongside the bell-jar of coffeebeans on the top cup storage surface(Fig.1, no.11).- Carry out the complete washing cycle asdescribed above.- Repeat the washing operation, this timewithout inserting the detergent tablet, inorder to eliminate any detergent residuescompletely.CLEANING AND MAINTENANCEENGLISH