20I N I S T R N UC O i I n C j aCARE &MAINTENANCECLEANING1 Separate all parts.2 Wash all containers in warm, soapy waterwith a soft cloth.3 Hand WashingWash blade assemblies in warm, soapywater using a dishwashing utensil witha handle to avoid direct contact with theblades. Exercise care when handlingblade assemblies as the blades are sharp.Thoroughly rinse and air-dry all parts.DishwasherAll attachments are dishwasher safe. Itis recommended that the lids and bladeassemblies be placed on the top rack of thedishwasher. Ensure that blade assembliesare removed from their containers beforeplacing in the dishwasher. Exercise carewhen handling blade assemblies4 Wipe the motor base with a clean, dampcloth. Allow time to dry before operation.STORINGStore the unit upright and store all bladeassemblies inside or attached to theirrespective containers with their lids locked intoplace.DO NOT store blended or unblendedingredients in the Nutri Ninja® Cup with theblade assembly attached.DO NOT stack items on top of the containers.Store any remaining attachments alongside theappliance or in a cabinet where they will not bedamaged or create a hazard.RESETTING THE MOTOR THERMOSTATThis appliance features a unique safety systemthat prevents damage to the motor and drivesystem should you inadvertently overload theappliance. If the appliance is overloaded, themotor will be temporarily disabled. Should thisoccur, follow the reset procedure below.1 Unplug the appliance from theelectrical outlet.2 Allow the appliance to cool forapproximately 15 minutes.3 Remove the container lid and blade assembly.Empty the container and ensure no ingredientswere jamming the blade assemblies.4 Reset the unit in accordance with theapplicable instructions for the containerand blade type.IMPORTANT: Ensure that maximumcapacities are not exceeded. This is themost typical cause of appliance overload.If your unit needs servicing, please callCustomer Service at 1-877-646-5288.