APEX SERIES DVR133. IR REMOTE CONTROLLER1. POWER : This button turns the DVR off.2. ID : This is button is to set the ID of the remote controller. Press this button 16 times or until theDVR beeps to match the ID with the DVR3. MON : This button is used to select different monitors to control. Pressing this button will turn onLEDs on buttons 1-4 thereafter, press desired monitor number.4. SEQ : This button is used to activate camera sequencing. Press and hold to activate SequenceTour List.5. SELECT : This button is used to select a camera for PTZ control in multi display mode.6. LOCK : This button is used to lock the buttons on the front panel/remote controller by logging off.Press it again and then apply appropriate password to login.7. BACKUP: This button is to enter BACKUP menu.8. ACK : This button is used to manually turn off alarm relay and buzzer when set for unlimitedduration.9. OSD : This button is used to change on screen display.10. PANIC : This button is used to manually turn on/off the Panic recording mode. It can be manuallyconfigured in Quick Setup menu.