Nuvico DT-E400 Instruction Manual

Contents

Nuvico DT-E400 Instruction Manual Manual pdf 11 page image

10/ Start/Stop all live view Next pageCapture pictures in the live viewmode / Open/Close audio/ Start/Stop all recording / Start/Stop two-way Audio/ Enable/Disable digital zoom Adjust volumeRecordingBefore you startMake sure the device is connected with HDD or network disk, and the HDD or network disk has been initializedfor the first time to use.Two recording types can be configured: Manual and Scheduled. The following section introduces theconfiguration of scheduled recording.Steps:1. Click Remote Configuration> Camera Settings> Record Schedule to enter Record Schedule settingsinterface.2. Select the camera to configure the record schedule.3. Check the checkbox of Enable Record Schedule to enable recording schedule.4. Click Edit to edit record schedule.5. Choose the day in a week to configure scheduled recording.1) Configure All Day or Customize Record:If you want to configure the all-day recording, please check the All Day checkbox.If you want to record in different time sections, check the Customize checkbox. Set the Start Timeand End Time.The time of each segment cannot be overlapped. Up to 8 segments can be configured.2) Select a Record Type. The record type can be Continuous, Motion, Alarm, Motion & Alarm, andMotion | Alarm.3) Check the checkbox of Select All and click Copy to copy settings of this day to the whole week. Youcan also check any of the checkboxes before the date and click Copy.4) Click OK to save the settings and exit the Edit Schedule interface.6. Click Advanced to configure advanced record parameters.7. Click Save to validate the above settings.Setup Guide of HDoCS™ Digital Video Recorder NUVICO