DV TURBO SERIES DVR49ALARM recording has been configured to record at 30pictures per second. Please verify that the USE for thecamera necessary has been set to ON.The combination of both settings will meet the requirement of recording 24 hours a day and seven days aweek at one picture per second for all channels until an alarm trigger occurs. When an alarm triggers,then the DVR will record 30 pictures per second for the duration of RECORD TIME, then resume thenormal recording of 1 picture per second.4.4.2 Motion recording and Alarm recordingFor instances where a location needs to be recorded whenever motion detection occurs and also needsto be recorded in case of an alarm triggers. Both motion and alarm recording can be used to satisfy therequirement.Motion recording has been activated under RECORD menu.The recording rate for motion is at 30 pictures per second.ALARM recording has been configured to record at 30pictures per second. Please verify that the USE for thecamera necessary has been set to ON.The combination of both settings will allow the DVR to record only when there is a motion detection oralarm trigger. At both instances, the DVR will record at 30 pictures per second for all channels.4.4.3 Schedule and Alarm recordingFor instances where a location needs to be recorded at a predetermined schedule, but also needs torecord in case of alarm triggers. Both schedule and alarm recording can be used in conjunction to meetthe requirement.