Nuvico EV-4000 Instruction Manual

Contents

Nuvico EV-4000 Instruction Manual Manual pdf 41 page image

MPEG-4 DVR403.4.4 SCHEDULE MOTION RECORDING & ALARM RECORDINGFor instances where a location needs to be recorded using only motion recording at a predeterminedschedule, but also needs to record in case of alarm triggers. Both schedule motion recording andalarm recording can be used in conjunction to meet the requirement.Any of the MODES within the schedule can be configuredto be run during the scheduled recording time period. Theillustration to the left has modified MODE1 to record at 30pictures per second. Please verify that the USE for thecamera necessary has been set to ON, and that MOTIONhas been set to ON.ALARM recording has been configured to record at 30pictures per second. Please verify that the USE for thecamera necessary has been set to ON.The combination of both settings will allow the DVR to record whenever there is a motion detectionduring the scheduled time period, but will record any time in case of an alarm trigger. At bothinstances, the DVR will record at 30 pictures per second for all channels.3.4.5 SUMMARY OF COMBINATIONThe following is the summary of possible combinations of recording modes.RECORD MODE MENU RECORDCAMERA USEALARMCAMERA USESCHEDULECAMERA USE MOTIONNormal RECORD ON OFF OFF OFFMotion RECORD ON OFF OFF ONAlarm ALARM OFF ON OFF OFFSchedule SCHEDULE OFF OFF ON OFFSchedule Motion SCHEDULE OFF OFF ON ONNormal and Alarm RECORD & ALARM ON ON OFF OFFMotion and Alarm RECORD & ALARM ON ON OFF ONSchedule and Alarm ALARM & SCHEDULE OFF ON ON OFFSchedule Motion and Alarm ALARM & SCHEDULE OFF ON ON ON