Nuvico EV2-400 Instruction Manual

Contents

Nuvico EV2-400 Instruction Manual Manual pdf 33 page image

32 EV2 Series DVR3. RECORD3.1. Record General1. The menus are displayed with options on the left-hand column and settings in theright hand column. A cursor (highlighted menu) can be moved using the Directionbuttons [ ] .2. Change below options using [DEC/INC] buttons.1) Schedule Use: This enables or disables Night Zone. By default “OFF”.2) Boot up Record: It starts to recording without pressing [REC] button when itset “ON”.3) Disk Overwrite: Select the record policy of the hard disk drive.- ON: By default, the hard disk drive will overwrite from the beginning when itbecomes full.- OFF: It stops recording after HDD is full.5) Auto Delete: Allows you to configure when the DVR automatically deletes alldata from HDD. It lefts the data for below duration from current time.[NONE 12HOURS 1DAY~ 6DAYS 1WEEK ~ 4WEEKS-> 30 DAYS]6) Pre-Record: Determines the duration of the DVR stores video recorded prior tothe beginning of Event Recoding. [5SEC ~ 300 SEC]. By default 5 sec.7) Post- Record: Determines the duration of the DVR continues record after Eventdetection. [5SEC ~ 300 SEC]. By default 5 sec.<Note>(1) Alarm/Motion Duration will be extended if there is another Alarm/motiondetection while Event recording.(2) When recording, the Pre-Record and Post-Record will not be activated.3. Select SAVE to save changes and press [ENTER] button to exit the menu.To exit the menu without making changes, press [ESC] button.