N76E885Jan 26, 2018 Page 8 of 18 Rev 1.00NUTINY-SDK-N76E885 USER MANUAL3 HOW TO START NUTINY-SDK-N76E885 ON THE KEIL C-51 μVISION® IDEDownloading and Installing Keil C-51 μVision® IDE Software3.1Please connect to the Keil company website (http://www.keil.com) to download the Keil C-51μVision® IDE and install the RVMDK.Downloading and Installing Nuvoton Nu-Link Driver3.2Please connect to Nuvoton 8bit 8051 MCUs website (http://www.nuvoton.com/8bit-8051-mcus) todownload the “Nu-Link_Keil_Driver” file. Please refer to section 5.1 for the detailed download flow.After the Nu-Link driver is downloaded, please unzip the file for example execute the “Nu-Link_Keil_Driver 2.03.6674” to install the driver.Hardware Setup3.3The hardware setup is shown as Figure 3-1Figure 3-1 NuTiny-SDK-N76E885 Hardware SetupExample Program3.4This example demonstrates the ease of downloading and debugging an application on a NuTiny-SDK-N76E885 board. It can be found on Figure 3-2 list directory and downloaded from Nuvoton8bit 8051 MCUs website.The example file can be found in the directory list shown in Figure 3-2.